Jeanne Mance Building - Installation of Exterior Bike Enclosure

The overall intent of the project will be the installation of a new bike enclosure on the northwest corner land of the Jeanne Mance building. This new installation will replace the existing bike enclosure currently located at the northeast corner land of the Jeanne Mance. The old bike enclosure will be decommissioned due to the PSPC delivered ESAP projects and BGIS delivered Medium Voltage Infrastructure project requirements within that area of land.

The new bike enclosure will include removal of existing soils to a depth of approximately 12 inches for the installation of a permeable surface and perimeter fencing to house and secure tenant employee bicycles.

While the project work is located on the exterior grounds of this site, the disruption to soils will be minimal and limited in overall depth for the purposes of installing a granular base for the enclosure's permeable surface. The enclosure is directly against the building on two sides with fencing located on two outer sides to secure the bicycles housed within. This project is estimated to encompass a total area of approximately 240m2.

This project is in line with Federal initiatives to promote transportation solutions in order to help achieve net-zero emissions within Canada by 2050.

Description of General Project Activities:

A certified and insured general contractor and their subcontractor(s) will perform the following activities:

Exterior Work

  • Excavate existing topsoil to a depth of 12 inches,
  • Saw cut and remove minor section of existing concrete pad,
  • Installation of concrete sonotubes to accommodate new 7'-8' chain link fence,
  • Installation of granular base material,
  • Installation of a permeable surface on granular bedding material within bike enclosure,
  • Installation of duct bank to accommodate future security data/cameras and power receptacles.
  • Installation of weatherproof junction box at wall penetration (above grade).

Interior work

  • Installation of access hatches in select areas.
  • Routing electrical conduits and wiring above ceiling space to proposed electrical panel.

The majority of work is expected to occur on land by personnel using a combination mechanized equipment such as a small excavator, skid-steer loader and dump truck along with hand-held power tools such as small electric, gas or pneumatic operated tools (i.e. quick cut concrete saw, chipping tools, edger etc.). Additionally, select project activities are expected to be performed inside of the adjacent Jeanne Mance building to accommodate electrical tie-in for power and security purposes.

This work is not expected to include alteration of existing parking lot, roadway, utility infrastructure or walkway footprints, nor is work expected to involve relocation or redesign of trees, wildlife habitats or vegetation (aside from existing grass removal).


Disclaimer

This map is for illustrative purposes. The markers represent the approximate locations based on available data. More than one marker may be identified for a given assessment.

 

Latest update

July 27, 2022 – The authorities intend to make a determination regarding whether the carrying out of the project is likely to cause significant adverse environmental effects. To help inform this determination, the authority isare inviting public comments until August 27, 2022 respecting that determination.

Key documents

Key documents
Document Number Document Title File Date
1 Jeanne Mance Building - Installation of Exterior Bike Enclosure - July 27, 2022

List all records

Contacts

Environment, Health and Safety
Public Services and Procurement Canada
2720 Riverside Drive
Ottawa, Ontario K1A 0M2
Email: TPSGC.RCNLVEEListedeControle-NCRECMPChecklist.PWGSC@tpsgc-pwgsc.gc.ca


  • Location

    • Jeanne Mance Building #19 (Ontario)
  • Nature of Activity

    • Building and Property Development
  • Assessment Status

    In progress
  • Start Date

    2022-07-27
  • Proponent

    PSPC
  • Authorities

    • National Capital Commission
    • Public Services and Procurement Canada
  • Assessment Type

    Project on federal lands
  • Reference Number

    83846

Nearby assessments

..within 200 kilometres
Date modified: