Registry Search Mobile

Registry Search

Canadian Coast Guard Seal Cove Base Mid Shore Patrol Vessel Float Replacement

The Canadian Coast Guard (CCG) is undertaking a project to replace the aging concrete Mid shore Patrol Vessel (MSPV) floats that are located along the east side of the main wharf. This float provides moorage for lifeboats and Search and Rescue (SAR) vessels stationed at Seal Cove base.

The proposed project involves the removal and installation of several floats at Seal Cove Base, as well as the installation of piles at this location. This project involves the replacement of five of the existing floats including the gangway float, and the installation of six new steel mooring piles in order to secure the floats. The floats are used by ATVs for delivering equipment to the lifeboats and SAR vessels. Upon completion, this project will minimize all associated risks to the site staff by allowing safe moorage of the MSPV vessel during all types of weather.

The float consists of three separate 2.4m wide concrete floats secured end to end resulting in a total length of 57m. The new float will be 1.255m wider to address the space issue. In addition to this, the gangway at float #2 and the float #10 will be replaced. Six new steel piles will be installed and the existing timber piles will remain – need the diameter and length. The total new float footprint will be  approximately 325 square meters, which will replace the existing float footprint of 244 square meters (an increase of 81 square meters). The floats will be located in the same locations as existing floats; the only difference will be that some of the floats are slightly wider (3.6 m wide instead of 2.45 or 3.2 m wide). The floats are prefabricated (timber and concrete) and will  be towed to the site

The new mooring piles (6 steel piles , 0,.46 m diameter, will have a total footprint of 0.98 square meters which is within the footprint of the floats. The water depth over the float area varies from approximately 3 m below low water to 9 m below low water (ie -3 m to -9 m chart datum).


Disclaimer

This map is for illustrative purposes. The markers represent the approximate locations based on available data. More than one marker may be identified for a given assessment.

 

Latest update

June 25 – The Department of Fisheries and Oceans Canada intends to make a determination for the project. To help inform this decision, the Department of Fisheries and Oceans Canada is inviting public comments until July 25, 2020 on the project’s potential for causing adverse effects. .

List all records

Contacts

  • Real Property and Technical Services Pacific Region
  • Fisheries and Oceans Canada
  • Telephone: 604-666-6491
  • Fax: 604-666-4725
  • Email: Michael.Liang@dfo-mpo.gc.ca

  • Location

    • Seal Cove Base is located on the Northern tip of Kaien Island, approximately 4km Northeast of the city center of Prince Rupert, BC. Seal Cove Base is accessible by road access, helicopter, and boat. (British Columbia)
  • Project Type

    • Other, not otherwise specified
  • Status

    In progress
  • Start Date

    2020-07-01
  • Proponent

    Fisheries and Oceans Canada-Real Property Safety and Security, Real Property & Technical Support
  • Authorities

    • Fisheries and Oceans Canada
  • Assessment Type

    Project on federal lands
  • Reference Number

    80802
Date modified: